Superflex Dynasty Trade Calculator 2026: QB Values Done Right

A superflex dynasty trade calculator has one job that a normal calculator cannot do: it must price quarterbacks like the scarce assets they actually are in superflex. In a 1QB league, your third quarterback is a bench stash. In superflex, that same quarterback is a weekly starter, a bye-week saviour and the first asset every rebuilding team asks about.

This page gives you a working superflex dynasty trade calculator built on real dynasty values from our own API, plus the scarcity maths, the format comparisons and the trading rules that stop you giving a starting quarterback away for a wide receiver and a prayer.

Superflex Dynasty Trade Calculator

Preset: Superflex and full PPR. Change any toggle and every value updates at once. Values load live from the keeptradecal API: 381 players and 24 rookie picks.

QB format
Scoring
TE premium

Side A

Side A total: 0

Side B

Side B total: 0

Verdict: Add an asset to each side to see the verdict and the value gap.

Loading live values from the keeptradecal API. If the API cannot be reached, this superflex dynasty trade calculator waits rather than showing invented numbers.

How values adjust: quarterbacks multiply by 1.0 in Superflex, 0.72 in 1QB and 1.3 in 2QB. Tight ends multiply by 1 plus TE premium times 0.12. Wide receivers and tight ends use 0.94 in standard, 0.97 in half PPR and 1.0 in full PPR. Running backs use 1.03 in standard, 1.01 in half PPR and 1.0 in full PPR. Picks are not adjusted by format.

Why Quarterbacks Top the Board in Superflex

In superflex you start two quarterbacks most weeks: one in the quarterback slot and one in the superflex slot. That single extra slot changes the entire economy of a dynasty league. A quarterback is no longer a one-per-team position. He is a two-per-team position, and the maths behind that change is brutal for anyone who tries to trade like they are still in a 1QB league.

Start with the obvious fact. The NFL has 32 teams, so there are only 32 starting quarterbacks in any given week, before injuries, byes and benchings shrink that number further. A 12-team superflex league needs 24 starting quarterbacks every single week, plus cover for bye weeks and injuries. That means three quarters of every starting quarterback in the league is already in a starting lineup before a single bench spot is considered.

In a 12-team 1QB league, by contrast, only 12 of 32 starters are needed, which leaves 20 starting quarterbacks sitting on benches, on waivers or in trade discussions as spare parts. Scarcity is not a feeling in superflex. It is arithmetic.

This is why the top of a superflex value board looks so different from a 1QB board. In our own dynasty values, dated October 27, 2026, Josh Allen sits at 8,437, Jayden Daniels at 7,402 and Drake Maye at 6,815. Those are not inflated quarterback numbers pasted in to make a point. They are the same scale on which Jahmyr Gibbs leads all players at 10,000, Ashton Jeanty follows at 8,668 and Bijan Robinson at 8,623.

In other words, the best quarterbacks in superflex are priced right alongside the best running backs and ahead of almost every wide receiver in the game. Puka Nacua, the top wide receiver on this scale, sits at 7,324, below Allen and essentially tied with Daniels. That ordering is the whole superflex lesson in one glance: an elite young quarterback is worth an elite young player at any other position, and often more, because you cannot find another one on waivers.

The second reason quarterbacks dominate superflex boards is weekly scoring. Quarterbacks touch the ball on almost every offensive snap, they score through the air and on the ground, and the gap between a top-12 quarterback and a replacement-level streamer is far larger than the equivalent gap at running back or wide receiver. When your superflex slot is filled by a quarterback who throws for 250 yards and two touchdowns, you are banking roughly 20 fantasy points that a flex running back or receiver only reaches on a good day.

Multiply that edge across a 14-week regular season and the quarterback advantage compounds into wins, playoff seeds and championships.

The third reason is dynasty-specific: quarterbacks last. A star running back gives you four or five elite seasons if you are lucky. A star wide receiver gives you six or seven. A star quarterback can give you a decade or more of top-12 production, and his value does not fall off a cliff the moment he turns 27.

That longevity is why young quarterbacks hold value through a bad season, a coaching change or even an injury-shortened year, while a running back in the same situation loses a third of his value overnight. When you trade for a quarterback in superflex, you are not renting one season. You are buying the most durable asset class in dynasty.

The Scarcity Math: 32 Starters, 24 Weekly Spots

Let us make the scarcity concrete, because vague talk about scarcity is how bad trades happen. The table below uses a standard 12-team league, which is the most common dynasty size, and counts only starting quarterbacks, not backups or prospects.

League shapeQB slots per teamStarters needed weeklyShare of 32 NFL starters usedSpare starters left
12-team 1QB11238 percent20
12-team superflex22475 percent8
12-team 2QB22475 percent8
14-team superflex22888 percent4
10-team superflex22063 percent12

Read the 14-team row twice. In a 14-team superflex league, 28 of 32 NFL starters are in lineups every week. There are four spare starters in the entire player pool, and most of them are already rostered as someone’s backup. If your starter gets hurt on a Sunday morning, there is often nobody to pick up who will score more than a handful of points.

That is the world your trade calculator has to live in, and it is why a backup quarterback with a pulse carries real trade value in superflex while the same player is droppable in 1QB.

Bye weeks make the squeeze worse. On a heavy bye week, four or six NFL teams are off, which can remove four or six starting quarterbacks from the pool in a single week. A 12-team superflex league that needs 24 starters suddenly has only 26 or 28 available, and two or three managers are starting a backup or a player who is not even a full-time starter.

The managers who planned ahead, rostering three or even four quarterbacks, sail through those weeks. The managers who treated quarterback as a one-per-team position lose those weeks before kickoff. Roster construction is therefore part of every superflex trade: you are never just trading a player, you are trading a week of lineup security.

Here is the practical checklist that falls out of the scarcity maths:

  • Roster at least three quarterbacks in superflex, and four if your bench allows it. Two is a gamble, not a plan.
  • Never trade your second quarterback without a replacement already on your roster or coming back in the same deal.
  • Price a backup quarterback as a starter-in-waiting, not as a bench player, because in superflex he often is one injury away from your lineup.
  • During bye weeks, a quarterback who starts for one week can be worth more than a flex player who starts all season, because points you cannot replace are points you lose outright.
  • Rebuilding teams should collect quarterbacks first and worry about running backs later, since quarterbacks hold value the longest and are the hardest assets to acquire once a league matures.

Superflex vs 1QB: The Same Player, A Different Price

The single most expensive mistake in dynasty trading is using a 1QB price in a superflex league, or a superflex price in a 1QB league. The player is the same. The jersey is the same. The price is not. This superflex dynasty trade calculator handles that difference with one multiplier: quarterbacks keep their full value in superflex at 1.0, drop to 0.72 in 1QB, and rise to 1.3 in 2QB, where a second forced quarterback slot makes the position even more precious than in superflex.

Flip the format toggle on this superflex dynasty trade calculator above and watch the same trade change verdicts without a single player changing sides.

The table below shows what that multiplier does to the top quarterbacks on our October 27, 2026 values. The Superflex column is the base value. The 1QB and 2QB columns are that value multiplied by 0.72 and 1.3 respectively, rounded to whole numbers.

QuarterbackSuperflex value (x1.0)1QB value (x0.72)2QB value (x1.3)What changes
Josh Allen8,4376,07510,968Top overall asset in 2QB; still elite in 1QB
Jayden Daniels7,4025,3299,623Young rushing upside holds up in every format
Drake Maye6,8154,9078,860Youth premium survives the 1QB discount
Brock Purdy6,7334,8488,753Safe starter value, biggest swing across formats
Caleb Williams6,2434,4958,116Draft capital keeps him priced as a long-term starter
Lamar Jackson5,9684,2977,758Rushing floor matters most when QB slots double
Joe Burrow5,7444,1367,467Elite passer, still a top-12 asset in all three formats
Trevor Lawrence5,7224,1207,439Mid-tier starter value jumps by over 1,700 in 2QB

Notice the size of the swing. Josh Allen loses 2,362 points of value moving from superflex to 1QB, and gains 2,531 moving to 2QB. That swing alone is bigger than the entire value of a mid second-round rookie pick, which sits at 998 for pick 2.02 on our October 27, 2026 pick scale. Any trade negotiated on the wrong format is therefore wrong by more than a pick before the first player is even discussed.

This is why the format toggle is the first thing you should check on any calculator, before you type a single name.

The comparison also explains why so many superflex trades look lopsided to outsiders. A manager trading away a quarterback for a wide receiver and a pick is not necessarily losing. In superflex, the quarterback side often needs the extra piece precisely because the quarterback is the more valuable asset. In 1QB, the same deal would be an overpay, because the quarterback can be replaced from the waiver pool. Format is not a detail. Format is the price.

For a fuller view of where every player sits on this scale, see our dynasty player values page, and for position-by-position context, the quarterback rankings page shows how the quarterback pool stacks up from the elite tier down to the streamers. The homepage calculator runs the same values for every format if you want to cross-check a deal there, and the dynasty rankings page puts quarterbacks, running backs, receivers and tight ends on one board.

How the Superflex Dynasty Trade Calculator Works

This superflex dynasty trade calculator at the top of this page is deliberately simple, because a calculator you cannot use in thirty seconds will not get used at all. It works in five steps, and every step is visible, so you can audit the result instead of trusting a black box.

  1. Set the format first. Leave the QB format on Superflex and the scoring on full PPR if those match your league. If your league is 1QB or 2QB, or plays standard or half PPR, change the toggles before adding players, because the multipliers change every quarterback, receiver, running back and tight end value on the board.
  2. Search and add. Type a name or a pick number into the Side A or Side B search box, then click the result to add it to that side. Picks appear as rookie picks, for example 1.01 or 2.01, with their own values from the API.
  3. Set TE premium if your league uses it. Move the slider to the extra points your league awards per tight end catch. A 1.0 TE premium multiplies every tight end by 1.12, and a 2.0 premium multiplies by 1.24, so a tight end like Brock Bowers moves from 6,527 at zero premium to 7,310 at 1.0 and 8,093 at 2.0 on our October 27, 2026 values.
  4. Read the totals and the gap. Each side shows its adjusted total. The verdict compares the two totals and reports the gap as a percentage of the larger side, so you can see at a glance whether a deal is fair, close or one-sided.
  5. Adjust before you send. Remove an item with the cross button, swap the sides to check the deal from the other manager’s view, or add a pick to close a small gap. A gap under 4 percent counts as fair here, which matches how most real negotiations work: nobody reopens a deal over a rounding difference.

One design choice matters more than the rest: this superflex dynasty trade calculator shows no invented values. If the API cannot be reached, it says so and waits, instead of quietly substituting made-up numbers. That restraint is the point. A calculator that guesses when it cannot load data will eventually talk you into a bad trade with a confident-looking number. Ours would rather show nothing than show something false.

Format Multipliers Explained

Every multiplier in this superflex dynasty trade calculator is stated openly, so you can check the maths by hand. There are no hidden adjustments, no secret bonuses and no site-specific fudge factors. The table below is the complete list.

AdjustmentSettingMultiplierExample on October 27, 2026 values
Quarterback formatSuperflexQB x1.0Josh Allen stays at 8,437
Quarterback format1QBQB x0.72Josh Allen falls to 6,075
Quarterback format2QBQB x1.3Josh Allen rises to 10,968
TE premium0 pointsTE x1.0Brock Bowers stays at 6,527
TE premium1.0 pointTE x1.12Brock Bowers rises to 7,310
TE premium2.0 pointsTE x1.24Brock Bowers rises to 8,093
PPR scoringStandardWR and TE x0.94; RB x1.03Puka Nacua 7,324 becomes 6,885; Jahmyr Gibbs 10,000 becomes 10,300
PPR scoringHalf PPRWR and TE x0.97; RB x1.01Puka Nacua becomes 7,104; Jahmyr Gibbs becomes 10,100
PPR scoringFull PPRWR and TE x1.0; RB x1.0Both stay at base value
Rookie picksAny formatNo format multiplierPick 1.01 stays at 5,496 in every format

Why do running backs go up in standard scoring while receivers go down? Because the base values are built for full PPR, where receptions reward receivers most. In standard scoring, a catch is worth nothing on its own, so a receiver who earns his living on volume loses value, while a running back who earns his living on carries and touchdowns gains relatively.

The multipliers are small, only a few percent, but on a 7,000-point player a few percent is several hundred points, which is the difference between a fair deal and a deal that needs another pick.

The TE premium multiplier deserves a special note, because it is the most misunderstood setting in dynasty. A 1.0 TE premium does not add a flat bonus to tight ends. It multiplies their value by 1.12, which means elite tight ends gain far more in absolute terms than replacement-level ones. Brock Bowers gains 783 points at a 1.0 premium, while a tight end worth 2,000 gains only 240.

That is correct behaviour: in a TE premium league, the gap between an elite tight end and a streamer is genuinely larger, because every catch is worth more. If your league plays TE premium and your calculator ignores it, you will systematically undervalue the top three or four tight ends and overpay for them, or underprice your own and sell them cheap.

Finally, note what the multipliers do not do. They do not adjust for age, team situation or injury, because those factors are already inside the base values from the API. A 24-year-old quarterback is priced above a 33-year-old quarterback before any format multiplier is applied, and that age gap survives every format change. The multipliers only answer the format question: what is this player worth in my league’s rules? Everything else is already in the number.

Worked Examples With Real Values From October 27, 2026

Abstract multipliers are easy to nod at and hard to use. Worked examples are the opposite, so here are three deals built entirely from real October 27, 2026 values, each showing the raw values, the adjusted totals and the verdict. Run each one through this superflex dynasty trade calculator above with the stated settings and you will get the same numbers.

Example 1: A fair superflex swap

SideAssetsBase valuesSuperflex plus full PPR total
Side AJosh Allen (QB)8,4378,437
Side BBrock Purdy (QB) plus rookie pick 2.016,733 plus 1,6068,339
GapSide A ahead by 98Gap as share of larger side1.2 percent: fair trade

Example 1 is the shape of a good superflex deal. Side A gives up the best quarterback and gets back a solid starter plus a pick that can become a useful player. The gap is only 98 points, or 1.2 percent, which is well inside the fair band. Neither manager should feel robbed, and both rosters still make sense afterwards: Side A still has a starting quarterback, and Side B has upgraded to an elite one.

If you ran this deal in 1QB instead, Allen would fall to 6,075 and Purdy to 4,848, and Side B at 6,454 would suddenly be overpaying by nearly 6 percent. Same players, same picks, different verdict, purely because of format.

Example 2: Why two quarterbacks beat one star receiver

SideAssetsBase valuesSuperflex plus full PPR total
Side APuka Nacua (WR)7,3247,324
Side BJayden Daniels (QB)7,4027,402
GapSide B ahead by 78Gap as share of larger side1.1 percent: fair trade

Example 2 surprises managers who come from 1QB leagues, where a star receiver for a quarterback straight up would look like a clear win for the receiver side. In superflex it is almost exactly even, and the quarterback side even edges it by 78 points. The reason is the one from the scarcity table: a starting quarterback is harder to replace than a star receiver, because there are more star receivers than starting quarterbacks, and your flex slots can absorb a receiver loss far more easily than your superflex slot can absorb a quarterback loss.

If you are the team trading Daniels away here, make sure you already have two other starting quarterbacks, or this fair-looking deal will still wreck your lineup.

Example 3: What a top pick is really worth in a quarterback deal

Rookie pick 1.01 sits at 5,496 on our October 27, 2026 scale, pick 1.02 at 5,091, pick 1.03 at 4,974 and pick 1.12 at 1,952. Those numbers matter because picks are the most common sweetener in quarterback trades, and managers routinely overrate them. A top-three pick is worth roughly a mid-tier starting quarterback such as Jared Goff at 4,766 or Patrick Mahomes at 4,718, but it is not worth an elite young quarterback on its own.

Josh Allen at 8,437 needs pick 1.01 plus a starting-calibre asset on top, not just pick 1.01 and hope. The full pick scale runs from 5,496 at 1.01 down to 461 at 2.12, so a late second-round pick closes a gap of a few hundred points, not a gap of a few thousand. When a trade partner offers a second-round pick to bridge a 2,000-point gap, this superflex dynasty trade calculator will show you immediately that the bridge does not reach.

Superflex Trading Rules That Protect Your Roster

A calculator tells you whether a deal is fair. It cannot tell you whether a deal is wise for your roster, so here are the rules experienced superflex managers use alongside the numbers.

  • Never go below two starting quarterbacks. A deal that leaves you with one starter and a prayer is not a deal, it is a rebuild you did not choose. If the trade takes your second quarterback, the replacement must be in the same trade.
  • Sell quarterbacks when you have four, buy them when you have two. Depth at quarterback is a trade asset in itself. A fourth quarterback on a contender is wasted value; on a rebuilding team he is the first piece to flip for picks.
  • Pay for youth at quarterback, pay for production everywhere else. A 24-year-old starter holds value through a down year. A 29-year-old running back does not. Age matters less at quarterback, but it still matters, and the gap between a young starter and an old one is real money.
  • Check the bye weeks before you accept. Two quarterbacks who share a bye week leave you starting a third-stringer that week. A slightly worse quarterback with a different bye week can be the better acquisition.
  • Do not trade a quarterback for a package of lesser pieces unless you need the depth. Three quarters do not make a dollar in fantasy. A star plus a pick beats three average players almost every time, because only so many players can start.

And here are the mistakes that show up most often in superflex trade discussions:

  1. Using 1QB rankings to price a superflex deal, which undervalues every quarterback by 28 percent before the negotiation starts.
  2. Trading a starting quarterback for a wide receiver without checking who starts in the superflex slot the following week.
  3. Treating rookie picks as equal to proven starters, when pick 1.12 at 1,952 is worth less than a quarter of pick 1.01 at 5,496.
  4. Ignoring TE premium in a premium league, which quietly hands the other manager several hundred points of tight end value.
  5. Accepting a deal because the totals match, even though the deal leaves one roster with no cover at the scarcest position in the league.

For broader strategy beyond quarterback trades, the dynasty rankings page and the dynasty player values page are the two places to check before any major move, and the quarterback rankings page is the quickest way to see who the next starter up would be if you move one of yours. You can also return to the homepage calculator to re-run a deal under a different format before you send the offer.

Frequently Asked Questions

Is the superflex dynasty trade calculator free?

Yes. The superflex dynasty trade calculator is free with no login. Add quarterbacks, players and picks, and the superflex dynasty trade calculator prices both sides with quarterback scarcity built in.

Why are quarterbacks worth more in the superflex dynasty trade calculator?

Two starting quarterback slots across the league make the position scarce, so the superflex dynasty trade calculator prices quarterbacks near the top of the board instead of treating them like 1QB depth.

Can I compare superflex and 1QB values in the superflex dynasty trade calculator?

Yes. Flip the quarterback format and the superflex dynasty trade calculator reprices every quarterback at the 1QB factor, so the same deal can be judged under both formats in seconds.

What is a superflex dynasty trade calculator?

A superflex dynasty trade calculator compares two sides of a dynasty trade using values that reflect superflex scoring, where a second quarterback can start in the flex slot. Because quarterbacks are far scarcer in superflex, with 24 starters needed weekly in a 12-team league out of only 32 NFL starters, this superflex dynasty trade calculator prices quarterbacks at full value instead of the discounted value they carry in 1QB leagues.

This page’s calculator uses real values from the keeptradecal API and lets you switch between Superflex, 1QB and 2QB formats, plus standard, half PPR and full PPR scoring and a TE premium slider.

Why are quarterbacks worth so much more in superflex than in 1QB?

Supply and demand. A 12-team 1QB league needs 12 starting quarterbacks, leaving 20 NFL starters spare. A 12-team superflex league needs 24, leaving only 8 spare. When a position goes from abundant to scarce, its price rises, and this superflex dynasty trade calculator reflects that with a 1.0 multiplier in superflex against 0.72 in 1QB. On our October 27, 2026 values that moves Josh Allen from 6,075 in 1QB to 8,437 in superflex, a swing of 2,362 points on one player.

How do I know if a superflex trade is fair?

Add both sides to this superflex dynasty trade calculator with your league’s exact format and scoring, then look at the gap as a percentage of the larger side. A gap under 4 percent counts as fair on this page, which matches how real negotiations work: small differences are usually settled by preference, roster need or a late pick rather than by reopening the deal.

A gap over 10 percent needs a real asset added, not a throw-in, and a gap over 20 percent is a deal to walk away from unless your roster situation makes the lesser side uniquely valuable to you.

Should I trade a quarterback for a wide receiver straight up in superflex?

Sometimes, but only if you still have two starting quarterbacks after the deal. The worked example above shows Puka Nacua at 7,324 against Jayden Daniels at 7,402, which is essentially even on value. Value is not the only test, though. If trading Daniels leaves you starting a backup in your superflex slot, you have lost far more weekly points than the 78-point gap suggests, because replacement-level quarterback scoring is so much lower than replacement-level receiver scoring.

Fair on paper and good for your lineup are two different questions, and you need both answers to be yes.

What is TE premium, and should I turn it on?

TE premium is a scoring setting that awards tight ends extra points per catch, usually 0.5, 1.0 or 1.5 points. If your league uses it, set the slider to match, because it multiplies every tight end by 1 plus premium times 0.12: a 1.0 premium gives a 1.12 multiplier and a 2.0 premium gives 1.24.

If your league does not use TE premium, leave the slider at zero. Using the wrong setting will misprice every tight end in the deal, and the error grows with the quality of the tight end involved.

Where do the values in this superflex dynasty trade calculator come from?

The values come live from the keeptradecal Supabase API, which holds 381 valued players and 24 rookie picks built from our own research, not from another site’s ready-made rankings. The example tables on this page are snapshots of those values dated October 27, 2026, so they may differ slightly from the live tool if values have been refreshed since.

For the most current picture, use this superflex dynasty trade calculator itself rather than the printed examples, and check the official NFL site for team and depth-chart news that affects who is actually starting each week.

Do I need an account to use this superflex dynasty trade calculator?

No. The superflex dynasty trade calculator works without an account, a login or a download. Open the page and start adding players and picks right away.

Calculate your dynasty trade values now

Set your league format, add players and picks to both sides, and get an instant trade grade — free, no sign-up needed.

Calculate now for free